Description
Bilge Pump (Rule-Mate)
– All-in-one pump & switch (no float switch required)
– Automatic
– 750 GPH
– Submersible
– 12 volt DC bilge pump preferred by yachtsmen and commercial fishermen worldwide.
– Features a solid state water sensing technology that eliminates the need for a separate float switch. E
-Easy clean snap lock strainer, anti-fouling impeller.
– When water enters the bilge and reaches a certain height (2-3/4 inches) a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off.(On 2-3/4”; Off 1/2”)
– Amp Draw @ 12.0 Volts: 2.7
– Amp Draw @ 13.6 Volts: 3.1
– Fuse Size: 5 amps
– Connections: one straight and one angle Hose barb fitting.
– Discharge Opening: 3/4”
– Discharge Finish: Barbed
– Housing Material: ABS
– Strainer Material: ABS
– Impeller Material: Nylon
– Shaft Material: Stainless
– Seal Material: Nitrile/Teflon
– Temperature Limit: 200 ºF
– Fluid Capabilities: Bilge Water
– Typical Life: 1500 hours
– Shut-Off, (0 GPM): 12′
– Footprint: 2.75″ x 4.5″
– Wire Length: 29″
– Wire Gauge: 16 AWG
– Certifications: ISO 8846, ISO 10133, CE Certified EN50081-1 & EN50082-1, UPC Code 042237-111081
Additional information
| Weight | 1.4 lbs |
|---|---|
| Dimensions | 7 × 8.5 × 2.75 in |
